Ocz ssd utility no supported drives found

#Ocz ssd utility no supported drives found install#
#Ocz ssd utility no supported drives found update#
#Ocz ssd utility no supported drives found driver#

It is aboutВ time they update the RevoDrive seriesВ with someВ NVMe performance in a much more versatile form factor!ДЄВ direct competitor to the Samsung 950 Pro and Intel 750 Series the all newВ RD400 is OCZвЂ™s first consumer M.2 NVMe SSD to enter the market. While theseВ large, multi-controllerВ SSDs were fast compared the SATA based competition, with the introduction of NVMe, they have become a thing of the past. This product line has had a few updates throughout the years with the most recent before the RD400 being the RevoDrive 350. In the past OCZ developed the RevoDrive series for those who demandedВ more performance than what SATA could deliver. Finally, when we put it through the paces for some real world file transfers, it boasted great performance and power efficiency. In PCMark Vantage the RD400 was able to score 245-260K points with many speeds well over 1GB/s and in PCMark 8, it held its own against the fierce competition. Crystal Disk Mark revealed 50MB/s read and 250MB/s write 4K QD1 performance. It was able to achieve over 2.7GB/s read and 1.6GB/s write during ATTO. Looking back at the performance the OCZ RD400 has to offer during our grueling benchmarking sessions, it is without a doubt we can say it is one of the best consumer drives out on the market.

#Ocz ssd utility no supported drives found driver#

See post #4.When we first took a look at the OCZ RD400 we noticed right away that it was identical to that of the recently reviewed Toshiba XG3, in fact, we would go as far to say that it is simply a XG3 in disguise! Of course with slight firmware tweaks and an added performance improving driver from OCZ.В Digging around in the latest OCZ SSD Utility even somewhat confirms itВ by showing theВ the Config ID being XG3_57CZ! If anyone has any ideas or suggestions on why the toolkit won't recognize the Vertex 3 I would appreciate them. I might get lucky and the drive already has the current firmware.

#Ocz ssd utility no supported drives found install#

I suppose if I can't get the Toolbox to recognize the drive my only option will be to put the Vertex 3 in place as the primary drive and go ahead and install the OS and see what happens. It still will not show up in the OCZ Toolbox. The Vertex 3 shows up in the BIOS and in the device manager and in Windows Explorer after I formatted it. It says there is no OCZ technology drive found. My problem is that after restarting with the vertex in place as the secondary drive, the Vertex 3 is not recognized by the OCZ toolkit. I was then going to remove the OS HD and put the SSD in its place and do a clean install of the OS. As most probably know, the Vertex 3 firmware can't be upgraded if the drive is OS drive. My plan was to remove the 2nd hard drive (non OS drive) and put the Vertex 3 in its place so that I could run the OCZ Toolbox and update the firmware if needed. I had some reservation about getting the Vertex 3 but decided to give it a shot. I've got a new 120GB OCZ Vertex 3 SSD I'm trying to install but have run into a snag at the start.